How to inspection all the fabric

How to inspection the fabric (H&M Buyer)

                           

                                   Blanket/mat cutting

                                                   ▼

                                            Inspection

                                                   ▼

                                         Shade making

                                                   ▼

                                   Colour Quantity card

                                                   ▼

                                         Shrinkage test

                                                   ▼

                                          Twisting test

                                                   ▼

                                             GSM test

Δ FABRIC INSPECTION PROCEDURE.

FABRIC INSPECTION FOR 4POINT SYSTEM.

0 TO 3 INCH = 1 POINT = WHITE STICKER

3 TO 6 INCH = 2 POINT = GREEN STICKER

6 TO 9 INCH = 3 POINT = YELLOW STICKER

9 TO UP (36 INCH/1YDS/1 MTR) = 4 POINT RED STICKER

Less or equal to 1´´ = 2 POINT = GREEN STICKER

Larger than 1´´ = 4 POINT = RED STICKER

#

Note# Any shading -04 point Red sticker.

           Any hole -04 point Red sticker.

# 1^ST FABRIC INSPECTION FOR 10% IF FAIL THEN AGAIN 15% IF FAIL THEN AGAIN 100%

#IF FABRIC IS LESS THEN INSPECTION WILL BE 100%

# THE fabric inspection must either be alternated between 2 people every 2 hours, or a break scheduled every 2^nd hour, in order to make a proper judgments and to avoid fatigue.

# Overhead and transmitted lighting minimum 1000 lux

# All colures and shades must be checked in a light box against the colour standard and the approved sample.           ( D65 , TL 83&UV)

#INDIVIDUAL ROLL POINT

ROLL POIN×100×36÷TOTAL INSPECTED YDS×CUTABLE WIDTH

(Inch)=% YDS

#AVARAGE POINTS FOR INSPECTED LOT

 #TOTAL ROLL POINT ×100×36/TOTAL INSPECTED YDS×CUTABLE WIDHT (inch)=%YDS

ACCEPTABLE POINT FOR YDS %

FABRIC        TYPE	AVERAGE	INDIVIDUAL ROLL
WROSTED WOOL	10	13
SYNTHATIC	13	17
CORDUROY	25	30
OTHER	18	24

# REPORTING  S/B DURING FABRIC INSPECTION.

# IF FABRIC INSPECTION FAIL THEN THIS ROLL KEEP SEPARATELY IN THE REJECTION AREA.

►FABRIC COMMON FAULT ( Kvc‡oi mvavib mg¨vmv )

1.   Broken yarn ( myZvi mgm¨v )

2.   Missing yarn ( myZvi Abycw¯—wZ )

3.   Color yarn ( Ab¨ is‡Oi myZv )

4.   Shading bar (

5.   Slubs ( RgvU myZv )

6.   Knots ( myZvi wMov )

7.   Hole ( wQ`ª )

►Shrinkage test system.

1.   Cotton fabric 10% roll shrinkage test

2.   Spandex fabric 100% roll shrinkage test

·       Running shading parta shading reject.

But shalvage shading.cutting by shalvage marker.

Thanks you...👍